12
Note: If the camera switches off automatically, there are
two reasons:
1. The battery power is too low and the camera must be
charged.
2. The camera has been in standby mode without any
operation for longer than 1 minute. In this case, the camera
switches off to save battery power.
Note: If there is no microSD card inserted, the LED will flash
blue for 10 seconds.
How to Use Your Conbrov HD088 Camera
HD Mode: The pixel is 1280*720. The indicator light is Blue.
Press and hold the Power to switch the camera on. The blue
light flashing continually indicates that the camera is
recording in HD mode. Press Power again to stop recording
and save the video. The LED lights up blue and the camera
is in standby mode.
choosing the HD Mode
1280*720 pixel
camera is recording
blue indicator
To Next Page
Loading...
