concept 2 Model B - Installing Heart Rate Interface on a Model B; J-clip and Connector Setup; Wire Routing; Receiver and Monitor Connection

2
1207
PN 1761
3 J-clips and Heart Rate (HR) receiver w/cable
installing heart rate interface on a model b
If signal is not picked up, place the receiver on
the floor under the middle of the monorail.
Thread wire into holders.
OFF
6.
1.
3.
5.
7.
2.
4.
HR receiver
J-clip
J-clip
J-clip
J-clip
J-clip
J-clip
HR receiver
J-clip