concept 2 Model B - Installing Heart Rate Interface on a Model C; J-clip and Connector Setup; Monitor and Receiver Connection; Wire Routing by Build Date

3
1207
OFF
*A. Routing for machines built before Oct. 1, 1997.
*B. Routing for machines built after Oct. 1. 1997.
Note for storage: Before you disconnect monorail from front end, remove
receiver from VELCRO
©
patch and remove cable from framelock area.
*A.
*B.
1.
3.
5.
7.6.
2.
4.
*B.
*A.
Route wire through
the framelock.
For machines
built before 7-1-95.
For machines
built after 7-1-95
21”/53cm
J-clip
HR receiver
J-clip
J-clip
J-clip
J-clip
J-clip
PN 1761
3 J-clips and Heart Rate (HR)
receiver w/cable
installing heart rate interface on a model c