DEEP LEARNING PLUS QUICK START GUIDE22
b. Host: Enter the IP address or DDNS name for the desired Concept Pro recorder.
c. Port: Enter the HTTP port number for the desired Concept Pro recorder.
d. Protocol: HTTP protocol.
e. Username: Enter the username for the desired Concept Pro recorder.
f. Password: Enter the password for the desired Concept Pro recorder.
g. Connection: Click CHECK to confirm the recorder connection is active.
h. Event Date: Check this to transmit event metadata and snapshot from DL PLUS to the
Concept Pro recorder when an event is detected.
i. Panic Recording: Check this to trigger panic recording on the Concept Pro recorder when
an event is detected by the DL PLUS unit.
3. When finished, select <APPLY> to save.
To Next Page
Loading...
