Concept Pro DL PLUS-16 - Page 34

DEEP LEARNING PLUS USER MANUAL
34
4. Configure the Loitering Detection parameters as desired:
a. Video Source: Select a desired channel for Loitering Detection.
b. Name: Enter a custom Loitering Detection Trigger preset name.
c. Target Object: Select an object type for detection (person/bike/car).
At least one target object must be selected.
d. Dwell Time: Set the time period that must elapse for Loitering Detection to occur.
e. Advanced Setup: If selected, additional configuration options will appear.
f. Loitering Label: Enter a custom label for the on-screen Loitering Detection counter
widget. Note: this label only displays on DL PLUS live video (web/HDMI display output).
g. Count Reset: Select a time for resetting the Loitering Detection counter, or manually
reset the counter.
5. If desired, import an existing detection rule zone. Or, create a new zone by clicking
and dragging the corners of the yellow box. Clicking within the lines allows for multiple
manipulation points to be created to fit any polygonal area.
6. Click and drag the red widget that will display the Loitering Detection trigger count.
7. When all parameters are configured, click <APPLY> to save the settings.