35
DEEP LEARNING PLUS USER MANUAL
STOPPING DETECTION
Stopping Detection is a function that is triggered whenever a new target appears inside a
configured area within the video source field of view, stops moving, and remains inside the area
for a set time period. For example, the system can be set to trigger if a car parks in a restricted
area for more than one minute (i.e., illegal parking detection). Detection is based upon the
centre point of a target object.
To configure a Stopping Detection DL Trigger, please follow the steps below:
1. From the <SETUP> tab, navigate to <DL SECURITY> - <DL TRIGGER> menu.
2. Select the <STOPPING> tab.
3. Click the <ADD> button to create a new Stopping Detection DL Trigger.
To Next Page
Loading...
