Concept Pro VUHDIP-4 - Page 6

NETWORK VIDEO RECORDER QUICK START GUIDE
4. AUTOMATIC RECORDING PROFILES
1. Press [MENU] on the remote control and use the direction buttons to select <RECORD
SETUP>, then press [ENTER].
Alternatively, select <MENU> - <RECORD SETUP> from the status bar.
2. Set <RECORD SETUP MODE> to <AUTO CONFIGURATION>
and select a desired recording prole:
- CONTINUOUS RECORD:
Always record video.
o LONG DURATION BUT LOW QUALITY:
Record video at a low quality, resulting in a longer recording time.
o HIGH QUALITY BUT SHORT DURATION:
Record video at a high quality, but resulting in a shorter recording time.
- MOTION RECORD:
Only record video when motion is detected.
- DLVA/ALARM RECORD:
Only record video when an alarm event occurs.
- MOTION/ DLVA/ALARM RECORD:
Only record video when motion or alarm events occur.
- INTENSIVE MOTION RECORD:
Record continuously at low quality and switch to high quality when motion events
occur.
- INTENSIVE DLVA/ALARM RECORD: Record continuously at low quality and switch to high
quality when alarm events occur.
- INTENSIVE MOTION/ DLVA ALARM RECORD:
Record continuously at low quality and switch to high quality when motion or alarm
events occur.
3. Click <APPLY>.
Additionally, <MANUAL CONFIGURATION> can be selected for a customised recording
prole and schedule.