1. Press “Power” button to power on unit.
11
2. Press “DATA/MODE” until “WiFI DISP” appears at top left of screen.
3. As this boots up, you will see “WiFi Display Dongle” come on the screen.
4. Wait until screen below appears:
5. For iPhone, skip to step 13.
6. For Android devices, go to your phone settings:
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
7. Select the “Connections” tab at the top.
8. Scroll to the bottom and tap on “Screen Mirroring”.
9. Look for the device with the matching address and tap on it.
Note: The term used for “Screen Mirroring” as well as the steps to get
to this setting may vary from phone to phone. Please refer to your
smartphone’s user manual, if necessary.
12
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
To Previous Page
Loading...
Need help?
General
