ENGLISH
39
e 3.2.2.4. Wireless Setting – AP Bridge Point to Point Mod
Parameter Description
Channe Select the appropriate channel from the provided list to corresp
with your network settings.
If you want to bridge more than one wired Ethernet networks
l Number ond
MAC Address 1
together with wireless LAN, you have to enter the MAC addresses of
reless
network. (For more information about the security settings, see
section 3.2.2.8)
other access points that join the bridging work.
nicationSet Security You can click “Set Security” to add encryption for the commu
between the bridged access points. This can protect your wi
Click the Apply button at the bottom of the screen to save the above configurations.
To Next Page
Loading...
