ENGLISH
40
ode 3.2.2.5. Wireless Setting – AP Bridge Point to Multipoint M
Parameter Description
Channel Number el from the provided list to correspond
with your network settings.
- 6
n
Select the appropriate chann
MAC Address 1 If you want to bridge more than one wired Ethernet networks
together with wireless LAN, you have to enter the MAC addresses of
other access points that join the bridging work.
Set Security You can click “Set Security” to add encryption for the communicatio
between the bridged access points. This can protect your wireless
network. (For more information about the security settings, see
section 3.2.2.8)
Click the Apply button at the bottom of the screen to save the above configurations.
To Next Page
Loading...
