ENGLISH
41
3.2.2.6. AP Bridge-WDS Mode Setting Page
Parameter Description
ESSID The SSID (up to 32 printable ASCII characters) is the unique name
g of
e. The default SSID
is “WLAN”.
Channel Number
of
other access points that join the bridging work.
Set Security You can click “Set Security” to add encryption for the communication
between the bridged access points. This can protect your wireless
network. (For more information about the security settings, see
section 3.2.2.8)
identified in a WLAN. The ID prevents the unintentional mergin
two co-located WLANs. Please make sure that the SSID of all
stations in the same WLAN network are the sam
Select the appropriate channel from the provided list to correspond
with your network settings.
MAC Address 1 - 6 If you want to bridge more than one wired Ethernet networks
together with wireless LAN, you have to enter the MAC addresses
Click the Apply button at the bottom of the screen to save the above configurations.
To Next Page
Loading...
