ENGLISH
52
Enter here the Access Point’s IP Address. This IP Address
should be unique in your network. The default IP Address is
10.0.0.1.
Subnetmask Specify a Subnet Mask for your LAN segment. The Subnet
Mask of the Access Point is fixed and the value is 255.0.0.0.
Gateway Address Enter here the IP address of the default gateway of the subnet
that this Access Point resides in. It allows this Access Point to
be accessible PC from different subnets.
DHCP Server Enable or disable the DHCP Server.
Default Gateway Address Specify the gateway IP in your network. This IP address should
be different from the Management IP.
Domain Name Server IP This is the ISP’s DNS server IP address that they gave you; or
you can specify your own preferred DNS server IP address.
Start IP/End IP You can designate a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients. By
default the IP range is from: Start IP 10.0.0.100 to End IP
10.0.0.200.
Domain Name You can specify the Domain Name for your Access Point.
Lease Time When the DHCP Server is enabled, it will temporarily give your
LAN client an IP address. In the Lease Time setting you can
specify the time period that the DHCP Server gives an IP
address to your LAN clients. The DHCP Server will change
your LAN client’s IP address when this time threshold period is
reached.
IP Address
Click the Apply button at the bottom of the screen to save the above configurations.
To Next Page
Loading...
