Conceptronic C56U - Connecting a Dial-up Connection; Disconnecting a Dial-up Connection

ENGLISH
14
4.2 Connect a dial-up connection
 Click on "Start", "Connect To".
Windows will open the 'Connect To' window.
 Select your dial-up connection and click "Connect".
The connection details of the selected dial-up connection will be shown.
 Dial-up connection.
Windows will now use your dial-up connection to connect to the internet. When the connection is
Successfully connected
 Close
4.3 Disconnect a dial-up connection
 Click on "Start", "Connect To".
Windows will open the 'Connect To' window.
 Select your dial-up connection and click "Disconnect".
The dial-up connection will now be disconnected. When the connection is disconnected, the message
Successfully disconnected
 Click Close