Conceptronic CLLCHATCAM - Chapter 3: Using the webcam; Using the Camera Capture Software

5
Chapter 3: Using the webcam
When the drivers and software are installed, you can use the installed webcam software to access the
extra functions of the webcam.
Start the webcam software by double clicking on the “Camera Capture” shortcut on your desktop, or use the
shortcut in the start menu:
“Start” --> “All Programs” --> “USB2.0 PC CAMERA” --> “Camera Capture”.
When the Amcap software is started, you will see a live stream of the webcam on your screen:
When no image of the webcam is visible, use the menu “Devices” to select the ” USB2.0 PC CAMERA”.