What to do if Concord Camera Eye-Q 4360z Digital Camera cannot take a picture when using an SD memory card?
If you cannot take a picture or video clip when using an SD memory card, the SD card might be locked or write-protected. Remove the SD card and slide the lock switch to the off position.
What to do if Concord Camera Eye-Q 4360z picture taken is blurry?
If your picture is blurry, it could be due to movement during capture. Ensure you hold the camera steady until the picture is taken. Also, make sure the focus is locked before fully pressing the shutter button. To lock the focus, press the shutter button halfway before fully pressing it to capture the picture.
What to do if Concord Camera Digital Camera flash did not work?
If the flash didn't fire, it could be normal if the camera is set to Auto Flash and there was sufficient light. The camera's light sensor is programmed to only fire the flash when needed. Also, check if the flash has been turned off. If so, turn the flash to Auto flash. Finally, verify that the Ready LED has stopped blinking before taking a picture.
What to do if Concord Camera Eye-Q 4360z buttons do not work?
If the camera or its buttons aren't working, the camera might need a reset. Press the reset button on the back of the camera using a pointed object like a pen, then power the camera off and on again.
Why does my Concord Camera Digital Camera turn off during usage?
Your Concord Camera Digital Camera might be turning off during use because the batteries are drained. Replace them with new ones. Alternatively, the 'Auto time off' setting may be too short. Your camera powers off to save battery if inactive.
What to do if Concord Camera Eye-Q 4360z flash picture taken is too dark?
If your flash pictures are too dark, the subject might be too far away for the flash to be effective. Move the subject or the camera closer. Also, ensure the flash is turned on. If the subject is in front of a bright light, change the subject's position. For dark lighting conditions, increase the exposure compensation.
Why does Concord Camera Digital Camera LCD screen looks milky?
If the LCD screen looks milky and/or scratched, make sure the protective plastic film covering the LCD during shipment has been removed.
What to do if Concord Camera Eye-Q 4360z LCD is not displaying anything?
If the LCD is not displaying anything, the LCD might be turned off. Turn it on by pressing the designated button. The battery level could also be low; replace the batteries.
What to do if Concord Camera Digital Camera shutter button does not work?
If the shutter button isn't working, ensure the camera is turned on. If it is, the camera might be processing a picture. Wait until the ready LED light stops blinking before attempting to take another picture.
How to fix color problems on Concord Camera Digital Camera photos?
If there is something wrong with the color of your photographs, the white balance might not be set properly. Reset the white balance feature to Auto, or for the specific lighting in the surrounding area.
General| Optical Zoom | 3x |
|---|---|
| Digital Zoom | 4x |
| Image Sensor Type | CCD |
| Storage Type | SD Card |
| Type | Compact |
| Megapixels | 4.0 MP |
| Screen Size | 1.5 inches |
| Battery Type | AA |
| Sensor Size | 1/2.5 inch |
Opening message welcoming the user to their new camera.
Identifies physical buttons, ports, and lenses on the front and top of the camera.
Identifies physical ports and features on the bottom and back of the camera.
Explains the meaning of various icons displayed on the camera's LCD screen during operation.
Lists all items included in the camera's original packaging.
Outlines the key specifications and capabilities of the Concord Eye-Q 4360z camera.
Instructions on how to power the camera on and off, and the lens extension behavior.
Guides on setting the camera's language, date format, and time for initial use.
Information on the camera's internal memory and how to insert an SD memory card.
Describes switching between Camera, Review, and Video Clip modes.
Step-by-step guide to framing and capturing images using the optical viewfinder.
Explains the steady and blinking states of the flash ready LED and their meanings.
Guide to framing and capturing images using the camera's LCD screen.
Instructions on how to freeze focus on a subject not centered in the frame.
Details various flash modes like Auto, Fill-in, and Night Mode for different lighting conditions.
How to zoom in and out using the camera's optical zoom lens.
How to utilize digital zoom for increased magnification, combined with optical zoom.
Explains how digital zoom works, its effects on image quality, and how to activate/deactivate it.
Navigating and using the main menu options for advanced shooting settings.
Details available capture modes like Single Shot, Continuous Shooting, and Macro options.
How to set and use the self-timer for delayed picture capture.
Instructions on enabling and using macro mode for capturing subjects at close distances.
How to capture a rapid sequence of images by holding down the shutter button.
Explains how to change image resolution and its impact on file size and detail.
Adjusting image quality (Fine, Normal, Economy) to control compression and file size.
How to adjust white balance for accurate color reproduction under various lighting conditions.
Adjusting exposure compensation to make pictures lighter or darker for better results.
Using preset scene modes (e.g., Sunset, Night Portrait) to optimize settings for specific situations.
Steps to start and capture video clips without sound on the camera.
How to stop the video recording process.
How to navigate and view stored pictures and video clips on the camera's LCD.
Specific steps to play back recorded video clips.
How to zoom in on stored still images for closer inspection.
Accessing and using the menu options within the review mode.
Instructions on how to delete individual files or all files from the camera's memory.
Viewing multiple stored files simultaneously in a thumbnail grid format.
Automating the display of stored pictures and video clips with selectable intervals.
How to copy photos and video clips from the camera's internal memory to an SD card.
Overview of accessing and navigating the camera's setup menu.
Adjusting the automatic power-off timer to conserve battery life.
Changing the on-screen menu language for the camera.
How to correctly set the current date on the camera.
Adjusting the current time, including the 12-hour or 24-hour format.
Adjusting the brightness level of the camera's LCD screen.
Instructions on how to format the camera's internal memory or an SD card.
Lists the default camera settings that can be restored.
Specifies the hardware and software needed to install the camera's companion software.
Outlines prerequisites for installing the camera software and drivers.
Explains how to interpret the installer's color-coded prompts for software installation.
A visual guide showing the sequence of software installation steps.
Detailed instructions for identifying Windows and Macintosh operating systems.
Step-by-step guide for installing camera drivers and DirectX on older Windows versions.
Instructions for installing DirectX 9 on Windows 2000 systems.
Guide for installing the photo editing software included with the camera.
Instructions for installing the optional PDF reader software.
Steps to transfer images and video from the camera to a computer.
How to use the photo editing software to manage camera files.
Safe procedures for disconnecting the camera from the computer.
How to select the correct TV output standard (NTSC or PAL).
Physical connection steps for viewing camera output on a TV.
Utilizing the TV screen as a live viewfinder for framing shots.
How to navigate and view camera files on a connected television.
Explains messages like "Internal Memory Error", "Memory Full", and "Card Full".
Solutions for when the camera or its buttons do not work.
Troubleshooting tips for poor image or video quality.
Common issues related to flash, exposure, and subject distance during photography.
Solutions for problems playing video clips on a computer.
Troubleshooting steps for software installation and driver detection problems.
How to resolve issues where the camera does not recognize the SD card.
Directs users to the manual's troubleshooting section for camera issues.
Information on accessing online support, FAQs, and product information.
Provides phone numbers and web links for customer service.
Technical specifications for the camera's lens, including focal length and zoom capabilities.
Details about the image sensor resolution, pixel count, and available image sizes.
Specifications for internal storage, shutter speed range, and aperture settings.
Information on the LCD display, menu language support, and connection types.
Physical dimensions, weight, and list of included accessories.
Guidelines for safely cleaning the camera body, lens, viewfinder, and LCD screen.
Important safety warnings and precautions for using the camera to prevent damage or injury.
Safety guidelines for handling, using, and storing camera batteries.
Important safety advice for using and handling SD memory cards with the camera.
Details regarding FCC compliance and warnings for digital device operation.
Information on radio frequency energy, potential interference, and user encouragement for correction.
Statements regarding compliance with VCCI (Japan) and CE (Europe) directives.
To Next Page
