Why is my daylight picture/video clip taken with Concord Camera Digital Camera too dark?
If your daylight pictures or video clips are too dark with your Concord Camera Digital Camera, the subject may be positioned in front of a bright light. Try changing the subject’s position to avoid this.
Why I cannot take a web camera video/ picture/video clip with my Concord Camera Eye-Q Duo LCD Digital Camera?
If you cannot take a web camera video, picture, or video clip with your Concord Camera Digital Camera, the batteries may be dead or weak. Replace them with fresh ones.
Why is the LCD monitor not clear on my Concord Camera Eye-Q Duo LCD Digital Camera?
If the LCD monitor on your Concord Camera Digital Camera is not clear, the LCD plastic monitor cover might be dirty. Clean the LCD monitor cover.
Why is there something wrong with the color of the captured image from my Concord Camera Eye-Q Duo LCD Digital Camera?
If there is something wrong with the color of the captured image from your Concord Camera Digital Camera, the White Balance might not be set properly. Try resetting the White Balance.
Why does my Concord Camera Digital Camera LCD is not displaying anything?
If the LCD on your Concord Camera Digital Camera is not displaying anything, it could be turned off. Try turning it on by pressing the designated button. Alternatively, the battery level might be low, so replace the batteries.
Why is the image blurred when looking through the viewfinder of my Concord Camera Digital Camera?
If the image is blurred when looking through the viewfinder of your Concord Camera Digital Camera, the viewfinder might be dirty. Clean it with a soft cloth or cotton swab. See the Camera maintenance section.
Why is my Concord Camera Eye-Q Duo LCD not responding during image downloading to PC?
If your Concord Camera Digital Camera is not responding while downloading images to your PC, the operating system may not be allocating enough resources. Try resetting the camera by opening and closing the battery door, and also reset the computer.
What to do if part of the picture/video clip is missing on my Concord Camera Digital Camera?
If part of your picture or video clip is missing when using your Concord Camera Digital Camera, something may have been blocking the lens. Keep hands, fingers, etc., away from the lens.
Why is my flash picture taken with Concord Camera Eye-Q Duo LCD too light?
If the flash picture taken with your Concord Camera Digital Camera is too light, the subject might be too close. Try moving the subject further away.
What to do if my Concord Camera Eye-Q Duo LCD Digital Camera will not turn on?
If your Concord Camera Digital Camera won't turn on, there are several possible causes. First, ensure that the batteries are installed correctly, following the direction indicators inside the battery cover. If the batteries are dead or weak, replace them with new ones. Also, make sure that the battery compartment is closed properly.
General| Effective Pixels | 5.0 MP |
|---|---|
| Digital Zoom | 4x |
| Flash Type | Built-in |
| Image Format | JPEG |
| Video Format | AVI |
| Storage | SD Card |
| Connector Type | USB |
| Storage Media | SD |
| Interface | USB |
FCC compliance for Class B digital devices and potential interference issues.
FCC compliance rules and measures to correct interference.
VCCI compliance for domestic use and potential radio interference.
PC requirements: OS, processor, RAM, USB, monitor, disk space.
Macintosh requirements: OS, processor, RAM, disk space.
Identifies front and back components of the camera.
Instructions for inserting LR6 AA batteries and note on removal.
Explanation of battery indicator for full or low levels.
Steps to power the camera on/off via LED and LCD status.
Message for insufficient MMC card memory for file transfer.
Message for no available storage space on MMC card.
Message for no available storage space in internal memory.
Message for corrupted memory, suggests formatting.
Instructions to turn the camera's LCD screen on or off.
Explanation of camera ready LED states: steady or blinking.
Default memory usage (MMC/Internal) based on LCD status.
Step-by-step guide to inserting an MMC memory card.
Step-by-step guide to inserting an MMC memory card.
Steps for capturing still images.
Navigating main menu for mode selection and settings.
Selecting camera modes: Video Clip, Self-timer, Main Menu.
Instructions to record video clips.
Instructions to set and cancel self-timer for delayed shots.
Options for image quality (Fine, Normal, Economy) and storage impact.
Settings for flash modes (Auto, Flash, Off) and distances.
White balance options (AWB, Sunny, Fluorescent, Tungsten).
Instructions to adjust LCD screen brightness.
Setup options: Timeout, Driver, TV, Language, Format, Default.
Setting automatic power-off duration to conserve battery.
Selecting PC (TWAIN/WDM) or Mass Storage (HDD) mode.
Setting TV output mode to NTSC or PAL.
Selecting display language for menus and messages.
Restoring all camera settings to factory defaults.
Formatting internal memory or MMC/SD card, deleting files.
Instructions for using 2X digital zoom for pictures.
Navigating captured images and video clips on LCD.
Using 2X enlargement to zoom into stored JPEG images.
Instructions to play back recorded AVI video clips.
Navigating Review Mode menu: Delete, Thumbnail, Brightness, Exit.
Options for deleting single or all files from memory.
Steps to delete all files from internal memory or MMC card.
Viewing files in thumbnail mode and selecting one.
Reference to Brightness section on P.22 for LCD adjustment.
Procedure for installing camera drivers and bundled software from CD-ROM.
Steps for connecting camera to PC for file transfer, including drivers.
Procedure for safely disconnecting camera from Windows PC.
Using camera as TWAIN/WDM device for PC images/video.
Using camera as external hard disk drive for file access.
How Windows users access files via Mass Storage mode.
How Mac users access files via Mass Storage mode.
Using ArcSoft PhotoImpression to import and manage photos.
Capturing/recording live video clips on PC using ArcSoft software.
Using camera as webcam for video conferencing with NetMeeting.
Connecting camera to TV to view files or record clips, NTSC/PAL.
Connecting camera to TV and using as live viewfinder.
Navigating TV menu: FW Version, Delete One, Thumbnail, Time-out, Save, Default.
Instructions to change camera's front face plate for customization.
Instructions for cleaning camera exterior with a soft cloth.
Cleaning lens, viewfinder, and LCD using specific cloths/tissues.
Troubleshooting power issues and web camera performance.
Troubleshooting picture/video quality, flash, or blur issues.
Troubleshooting dark pictures, full memory, or blurred images.
Troubleshooting capture response, battery, and LCD issues.
Troubleshooting issues downloading images to a PC.
Contact info for technical support in USA, Canada, and Europe.
Specs for camera lens, image sensor, and output resolution.
Specs for memory storage, viewfinder, and LCD screen.
Details on OSD display and selectable menu options.
Specs for frame counter, self-timer delay, and flash unit.
Specs for power, dimensions, weight, and connectivity.
Specs for web camera mode, connectivity drivers, and PC software.
List of included accessories: CD-ROM, cables, batteries, manuals.
Manufacturer's 1-year limited warranty, exclusions, and legal rights.
To Next Page
