AT Commands for CX930xx Modem Reference Manual
5-26 Conexant 102752C
+VGS - Speaker Gain
This command causes the modem to set the speaker gain of the speakerphone function.
Syntax
+VGS=<gain>
Defined Values
<gain> Decimal number between 0 and 255 corresponding to the gain.
Reporting Current or Selected Values
Command: +VGS?
Response: <gain>
Example: 128 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VGS=?
Response: <gain> range
Example: 0-255
Result Codes
OK <gain> = 0-255.
ERROR Otherwise, or if not in Voice Mode with speakerphone
enabled (+VSP=1).
To Next Page