Confer Plastics PES-DBL-X

To Next Page

MODEL PES-G-X GATE ASSEMBLY

Can be used on Pool Entry System, SIG-X System and STEP Enclosure Kit

ASSEMBLY AND INSTALLATION MANUAL

WARNING: GATE MUST BE PADLOCKED WHEN NOT IN USE.

Now with

Automatic Gate Closer!

NEW!!

MODEL

PES-DBL-X

To reduce the risk of drowning, entrapment, falls, paralysis, electrocution, or

other serious injury or death:

Dealer/Installer: Give manual to homeowner.

Installer: Read “Safe Installation” on p. 2 and all instructions before beginning. For proper assembly and

installation, instructions must be followed completely.

Homeowner: Read “Safe Use” in the instructions for the system or kit (Pool Entry System, SIG System, or

STEP Enclosure Kit) to which the gate will be attached before using. Gate must be latched at all times.

Secure gate with padlock when not in use. Save these instructions.

Installation must comply with local codes and may require permits.

MODEL SES-X

Made in the U.S.A. by

www.conferladders.com

Need help?

Do you have a question about the Confer Plastics PES-DBL-X and is the answer not in the manual?

Summary

Pool Entry Gate Assembly and Installation Manual

General Safety Warnings

Important warnings to reduce the risk of drowning, entrapment, falls, and electrocution.

Parts and Tools Required

Lists all necessary parts and tools for assembling the gate system.

Safe Installation Guidelines

Instructions for safe and compliant installation, including building codes and usage.

Step-by-Step Assembly Instructions

Detailed sequence of steps for the proper assembly of the gate system.

Safe Use of the Gate System

Guidelines for proper and safe operation of the pool gate system.

Pool Winterization Procedures

Recommended steps for removing and storing the gate system for the off-season.

Confer Plastics Five Year Warranty

Details of the manufacturer's warranty for pool ladders and steps.