Need help?Do you have a question about the Confidence XJCFT-0100 and is the answer not in the manual?
General| Brand | Confidence |
|---|---|
| Model | XJCFT-0100 |
| Category | Treadmill |
| Language | English |
Instructions to minimize risks and injuries, including user limitations, environmental conditions, and professional use.
Checks for belt alignment, carpet placement, appropriate clothing, empty pockets, footwear, and surrounding safety area.
Diagram illustrating treadmill parts with numerical labels for identification.
Instructions on using an Allen key to adjust the running belt's position if it is off-centre.
Comprehensive list of all treadmill parts with their corresponding numbers and quantities.
Instructions for opening the treadmill until the left and right uprights are vertical.
Instructions for fastening the locking pin into the main frame.
Connect computer wire with middle sensor wire, then fasten the console on the handle bar.
Attach tension control knob to the right upright, secured with a Philips screw and flat washer.
Cover the toe caps on the main frame and fasten them with Philips screws to complete assembly.
Instructions for folding the treadmill and locking it in place with the locking pin after exercise.
Details on settings for Time, Speed, Distance, Calorie, and key functions like Mode and Clear.
To Next Page
