To Next PageTo Next Page
Need help?Do you have a question about the Connecticut Electric EmerGen Switch 6-7501G2 and is the answer not in the manual?
General| Brand | Connecticut Electric |
|---|---|
| Model | EmerGen Switch 6-7501G2 |
| Category | Switch |
| Language | English |
Guidelines for safe portable generator operation with the EmerGen Switch.
Steps to identify and prepare load center circuits for transfer switch connection.
Positioning the switch and moving the wire bundle if needed.
Safety step to de-energize, prepare knockout for conduit.
Adjusting conduit length and attaching fittings to the EmerGen Switch.
Routing wires through conduit and securing the locknut.
Mounting the EmerGen Switch securely to the wall structure.
Detailed steps for connecting 120V circuits to the load center breakers.
Instructions for wiring 240V appliances using 2-pole branch circuit breakers.
Connecting the neutral and ground wires to the load center bars.
Reinstalling the load center cover and setting EGS switches to 'LINE'.
Filling out and affixing the circuit identification label.
Installing the junction box and routing conduit for generator input.
Running permanent wiring between the junction box and power inlet box.
Connecting EmerGen Switch input wires to the permanent generator wiring.
Correct switch positions for normal utility and generator power usage.
Step-by-step guide for testing generator and transfer switch functionality.
Procedure to reset mini-breakers that have tripped due to overload conditions.
