To Next PageTo Next Page
Need help?Do you have a question about the Connecticut Electric EmerGen Switch A series and is the answer not in the manual?
General| Amperage | 30 A |
|---|---|
| Voltage | 120/240 V |
| Poles | 2 |
| Maximum Generator Wattage | 7500 W |
| Type | Manual Transfer Switch |
| Current Rating | 30 A |
| Mounting | Surface |
| Compatibility | Generators |
| Warranty | 1 Year Limited |
| Phase | Single |
Technical details and ratings for different EmerGen Switch models.
Critical safety warning about potential damage or injury from improper installation.
Essential safety precautions for using the EmerGen Switch and generator.
Guidelines for safe generator operation and connection with the switch.
Steps to prepare for installing the EmerGen Switch, including circuit selection.
Detailed instructions for connecting the switch wires to the load center circuits.
Specific procedure for wiring 240-volt appliances using dual pole circuits.
Final steps to complete the installation, including neutral and ground connections.
Step-by-step guide for operating and testing the EmerGen Switch.
Guidance on balancing electrical loads and managing circuit breaker trips.
Common problems, their causes, and solutions for the EmerGen Switch.
