connexx SB-26 - User Manual

Questions and Answers

Y
ysmithAug 2, 2025
Why is there no sound coming from my connexx SB-26 Speaker System?
- G
  gabriellerileyAug 2, 2025
  If there's no sound, it might be due to several reasons. First, check if the volume is at the minimum level and raise it using the + button on the unit or the VOL+ button on the remote control. Also, ensure that the connected device is playing music or a movie and that its volume is set to a high level. Finally, verify that the input source is correctly selected by touching the (mode) button until you reach the desired mode.
J
James Key DVMAug 9, 2025
What to do if my connexx SB-26 Speaker System sound is distorted?
- W
  Wanda HallAug 9, 2025
  Sound distortion can occur if the bass level of the connected device is too high; try reducing it. Alternatively, the overall volume level might be too high, so decrease it using the - button on the unit or the VOL- button on the remote control.
L
lesliemillerAug 14, 2025
How to fix Bluetooth reception failure on my connexx Speaker System?
- C
  Chase SpencerAug 14, 2025
  Bluetooth reception issues can arise if the external device is too far away; try moving it closer to the unit. Another possibility is that the devices haven't been paired. In that case, pair both units as described in the manual.
K
Kathleen VasquezAug 20, 2025
What to do if the remote for my connexx SB-26 Speaker System is not working?
- C
  Crystal OlsenAug 20, 2025
  If the remote isn't working, the batteries may be depleted. Replace them with new batteries.
J
James MercadoAug 27, 2025
Why is my connexx SB-26 not turning on?
- M
  Michelle TaylorAug 27, 2025
  The speaker might not be turning on due to a disconnected power cable or a blown fuse. Check the power connection and the fuse.