EasyManua.ls Logo

Conrad Electronic GX106 - SMS, FAX, and EMAIL Communication

Conrad Electronic GX106
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAIL
You can enter up to 4 e-mail addresses (MAIL) here (e.g. max.muster-
mann@conrad.de). You have to enter all email addresses to which the
module is supposed to be able to send an email. E-mail addresses are
limited to 35 digits.
Information about SMS, FAX and EMAIL
A mobile phone can send an SMS to an e-mail address or a FAX. A
mobile phone can also receive an e-mail as SMS. Your provider needs to
activate this service. To do so, send an SMS with the text „activate for e-
mail“ to the respective gateway number of the provider. Once activated,
you receive an e-mail address from your net operator on which the
mobile phone can be reached.
SENDING SMS FROM THE MOBILE PHONE TO AN E-MAIL
ADDRESS
In order to send a message to an e-mail address, you have to write an
SMS which first states the e-mail address followed by a blank and then
the text. You have to send this SMS to the provider’s gateway number.
e.g. you send the SMS:
max.mustermann@conrad.de This is the message.
with T-Mobile to the phone number 8000.
SENDING SMS FROM THE MOBILE PHONE TO A FAX
Write a normal SMS to send messages to a Fax. When entering the num-
ber, you only have to enter the recipient number (prefix) before the actu-
al fax number.
e.g. You want to send a Fax to 0180/5312110; you write a normal SMS
and send this to 155101805312110 with „E-Plus“.
With this module, the prefix number for sending from a fax only has to be
entered on the page „SIM“ and does not have to be entered separately
38