EasyManua.ls Logo

Conrad X-220 - User Manual

Conrad X-220
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual V1.0
Question and Answer IconNeed help?

Do you have a question about the Conrad X-220 and is the answer not in the manual?

Summary

Disclaimer & Warning

Product description

Overview of the aircraft's capabilities and intended use for enhanced flight and photography.

Notice before using

Essential pre-flight checks and safety considerations to ensure proper and safe operation of the aircraft.

Airborne camera use matters needing attention

Notice for battery using and charging

Limitation of liability

WARNING

In the box

1.0 Get to know your aircraft

2.0 Specifications

3.0 Attention before Flying

Crucial safety advice and recommended practices for pilots before commencing flight operations.

4.0 Charge the Battery

5.0 Prepare the aircraft

Install propellers

Instructions for correctly attaching clockwise and counterclockwise propellers to their respective motors.

Battery installation

Process for securely mounting the battery onto the aircraft using the provided velcro straps.

Gravity center adjustment

Method for adjusting the battery position to achieve the correct center of gravity for stable flight.

6.0 Ready to Fly

6.1 Starting the aircraft; Get binding

Instructions for initiating the aircraft and establishing a connection with the remote controller via binding.

6.2 Motor Unlock; Lock

Explanation of the motor lock feature on the remote controller dial for safety during operation.

6.3 Remote controller interface description

Identification and explanation of the various buttons, sticks, and displays on the remote controller.

7.0 Operation Instruction

8.0 End Flying

9.0 Additional Remark

9.1 Remote controller main menu and menu operate

How to navigate and operate the main menu for setting up the transmitter and selecting models.

9.2 Remote controller system setup menu operate

Guide to accessing and configuring settings within the remote controller's system setup menu.

9.2.3 Model copy

9.2.4 Model reset

9.2.5 RX setup

9.2.6 Sticks mode

9.2.7 LCD brightness

9.2.8 Firmware version

9.2.9 Firmware update

9.2.10 Factory reset

9.3 Remote controller functions setup menu operate

9.3.1 Channels reverse

How to reverse the direction of specific control channels for customized operation.

9.3.2 End points adjust

Instructions for adjusting the endpoint values for each control channel, with a caution against modification.

9.3.3 Channel traveling, midpoint, endpoint display

9.3.4 Aux. channel setting

9.3.5 Channel subtrim

9.4 Remote controller operate note

9.4.1 Remote controller low voltage alarm

Explanation of the low voltage alarm system for the remote controller and necessary actions.

9.4.2 Remote controller and receiver binding

Steps for binding the remote controller to the aircraft's receiver if they become unlinked.

9.4.3 Remote controller security guidance

9.5 OSD Interface Instruction

9.6 Main power board instruction

9.7 VTX Instruction

Conrad X-220 Specifications

General IconGeneral
BrandConrad
ModelX-220
CategoryDrones
LanguageEnglish