EasyManua.ls Logo

Conrad XCA 200 - Product Description

Conrad XCA 200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Do not place open sources of fire such as burning candles onto the appliance.
Consult suitably qualified staff, if you have doubts about how the equipment operates or about how to
connect it safely.
Do not leave packaging material unattended. It can be dangerous to children who play with it.
Never operate the appliance without supervision.
Do not use the device in a tropical climate.
Observe also the safety and operating instructions of any other devices which are connected to your
device.
Also observe the additional safety instructions in each individual section of these instructions.
If you are not sure about the correct connection or if questions arise which are not covered by
the operating instructions, please do not hesitate to contact our technical support or another
specialist.
Product Description
MOSFET technology
two stereo channels can be bridged in each case.
3 channel mode for stereo operation with subwoofer (only model XCA 400 and XCA 402)
Super Bass Switch
extreme steady PWM (pulse width modulation) power supply
protective circuit in case of a short circuit at the loudspeaker outputs and overheating
2-ohm-steady loudspeaker outputs
connectable active duplexer with adjustable cut-off frequencies
remote control via the car radio
turn-on delay to suppress interference noise at the turn-on moment
champagne-coloured connection terminals

Table of Contents

Related product manuals