Need help?Do you have a question about the Consilium SAL R1a and is the answer not in the manual?
General| Brand | Consilium |
|---|---|
| Model | SAL R1a |
| Category | Indoor Fireplace |
| Language | English |
Introduces the manual's purpose and scope.
Provides critical safety warnings, including first aid for electric shock.
Details procedures for shipping, storage, and general handling of the equipment.
Presents detailed technical data and specifications for the SAL R1a system.
Explains the fundamental principles and components of the SAL R1a system.
Covers operational aspects, calibration, and environmental factors.
Provides guidance on using the SAL R1a system.
General information about operating the SAL R1a from the bridge display.
Details the everyday operation of the SAL R1a speed log.
Explains alert indications and their purpose for troubleshooting.
Describes how to access and navigate the display's menu mode.
Details the specific menu modes available on the SD4-3 display.
Explains access levels for sub-menus within the system.
Lists available menu functions for quick indexing.
How to control display brightness remotely.
Covers the procedures for calibrating the speed log.
Guides through system setup after installation.
Provides methods for diagnosing and resolving system faults.
Guidelines for selecting optimal transducer mounting locations.
Instructions for installing bottom parts and the TRU assembly.
Covers the mechanical and electrical installation of the ELC unit.
Outlines procedures for system setup and testing after installation.
Instructions for mounting and connecting the SD4-3 display.
Specifications and dimensions of the bulkhead mounting box.
Details the SD4EB extension board with relay outputs.
Information on the SD4ED external dimmer switch.
Describes the SD4 SDR2 remote control panel.
Information on NMEA interface units like buffers and converters.
Specifications for the SD4-4 general instrument display.
Details the SIA-2-8 analog speed indicator.
Information on the dimmer potentiometer for the SIA-2-8.
To Next Page