General Information
Introduction
This instrument is manufactured with the latest technology and needs no particular maintenance. Consort
certifies that this instrument was thoroughly inspected and tested at the factory prior to shipment and found to
meet all requirements defined by contract under which it is furnished. However, dimensions and other physical
characteristics may differ.
The normal operating temperature should be between 0° and 40°C. Never use the instrument in a room with
high humidity (>95 %) or at very low temperatures (condensation water!).
Manufacturer
Consort bvba
Parklaan 36 Tel (+32)(14)41 12 79
B2300 Turnhout Fax (+32)(14)42 91 79
Belgium E-mail: info@consort.be
Warranty
This instrument (excluding all accessories) is warranted against defective material and workmanship for a
period of thirty-six (36) months from the date of shipment ex factory. Consort will repair all defective
equipment returned to it during the warranty period without charge, provided the equipment has been used
under normal laboratory conditions and in accordance with the operating limitations and maintenance
procedures in this instruction manual and when not having been subject to accident, alteration, misuse or
abuse. A return authorisation must be obtained from Consort before returning any product for warranty repair
on a freight prepaid basis!
Consort is not liable for consequential damages arising out of the use or handling of its products.
Servicing
In the event of this instrument being returned for servicing, the owner is requested NOT to send the following
items unless they are suspect:
Manual
Cables
Accessories
If serious malfunctioning occurs, stop using the unit immediately and consult your local Consort dealer.
Batteries
The batteries can be replaced by opening the bottom compartment of the cabinet. Only use NiMH batteries!
AC adaptor
Connect the mains adapter to the DC socket.
Keyboard
F1, F2 = Variable function, selects the function displayed on the screen
OK = Validate
STORE = Store measurement
= Button for entering a value or for selecting a function.
ON/OFF = Switches the instrument on or off.
To Next Page
Loading...
Need help?
General
