Consort PHSL2 Series User Manual (English)

To Next Page

Installation & Control Guide for

SL Wireless Controlled Plinth Heaters

PHSL2 & PHSL3 SERIES

All electrical appliances produced for the Company are guaranteed for one year

against faulty material or workmanship. This applies only if the appliance has been

used for purposes in accordance with the instructions provided and has not been

connected to an unsuitable electricity supply, or subject to misuse, neglect,

damage or modified or repaired by any person not authorised by us. This guarantee

is offered to you as an extra benefit and does not affect your legal rights.

The correct electricity supply voltage is shown on the rating label attached to the

appliance.

Reasonable care has been taken to ensure that this guide is accurate at the time

of printing. In the interest of progress the Company reserve the right to vary

specifications from time to time without notice.

QUALITY SPACE HEATERS

68000828 Iss 01

Need help?

Do you have a question about the Consort PHSL2 Series and is the answer not in the manual?

Consort PHSL2 Series Specifications

General

Key safety warnings for appliance use, covering placement, handling, and misuse.

Explains the overheat protection device and its automatic reset procedure.

Guidance on how to clean the heater safely without damage.

Steps for diagnosing issues and connecting the appliance to the main electricity supply.

Advice on optimal placement and siting of the heater for effective warmth.

Step-by-step instructions for fitting the appliance into a plinth unit.

Details on how the heater operates with SL wireless controllers.

Explanation of the fan control switch for cold and hot air modes.