EasyManua.ls Logo

Consort PHSL2 Series - Operation and Control; Appliance Operation; Fan Control Switch Functionality

Consort PHSL2 Series
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CUSTOMER HELPLINE
Should you need any advice on the use of your new Consort product please
contact our Helpline:
Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web:
www.consortepl.com
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
BS EN ISO 9001 Registered Company No FM12671
Operation
This heater can only be used when connected to any SL
wireless controller. Each SL controller can control any
number of heaters providing they are in the RF range.
SL wireless controllers
Please refer to the SL installation and control guide for full
operational details.
SLPB
SLTI
SLVT
Fan Control Switch
There is a Fan Control Switch on the facia.
When the control switch is ‘OFF’ the
appliance blows only cold air. When this
control switch is ‘ON’, the heating elements
are engaged and the appliance blows
‘hot’ air. Both these operating modes
function under the control of the remote
‘SL’ switch.
Heating
‘ON’
FAN
Only
SLVTB

Related product manuals