EasyManua.ls Logo

CONSTRUCTA CD75132 User Manual

CONSTRUCTA CD75132
64 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Dunstabzugshaube
Extractor hood
Hotte
Afzuigkap
CD75132
de Gebrauchs- und Montage-
anleitung
2
en User manual and installation in-
structions
17
fr Manuel d'utilisation et notice
d'installation
31
nl Gebruikershandleiding en installa-
tie-instructies
47

Other manuals for CONSTRUCTA CD75132

Question and Answer IconNeed help?

Do you have a question about the CONSTRUCTA CD75132 and is the answer not in the manual?

CONSTRUCTA CD75132 Specifications

General IconGeneral
Bulb typeLED
Bulb power2.15 W
Illuminance438 lx
Number of bulbs2 bulb(s)
Removable filterYes
Number of filters1 pc(s)
Grease filter typeAluminum
Current10 A
Motor power200 W
Connected load206 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Annual energy consumption78 kWh
TypeBuilt-in
Cord length1.3 m
Product colorStainless steel
Built-in displayNo
Exhaust connection diameter150 mm
Noise level56 dB
Number of speeds3
Type of extractionDucted/Recirculating
Noise level (low speed)44 dB
Maximum extraction power590 m³/h
Lighting efficiency classA
Maximum recirculating power390 m³/h
Noise level (intensive speed)68 dB
Fluid dynamic efficiency classD
Noise level (recirculation mode)64 dB
Weight and Dimensions IconWeight and Dimensions
Depth380 mm
Width530 mm
Height255 mm
Weight7589 g
Installation compartment depth350 mm
Installation compartment width500 mm
Installation compartment height235 mm

Summary

Safety

General information

Read manual carefully, keep it safe, and check for transit damage before use.

Intended use

Designed for built-in kitchen use, extracting cooking vapour in domestic environments.

Restriction on user group

Applies to children aged 8+ and those with reduced abilities, requiring supervision or instruction.

Safe use

Warns about suffocation risks from packaging material and small parts for children.

Avoiding material damage

Condensation and corrosion

Prevent condensation by operating the appliance during cooking to avoid corrosion.

Cleaning and surface care

Use specified cleaners and methods to avoid damaging surfaces, avoid harsh detergents.

Repairs and modifications

All repairs and modifications must be performed by trained staff using genuine spare parts.

Electric shock prevention

Always unplug the appliance before cleaning to prevent electric shock.

Environmental protection and saving energy

Disposing of packaging

Sort packaging components by type and dispose of them separately for environmental compatibility.

Operating modes

Air extraction mode

Air is filtered and conveyed to the exterior through a pipe system.

Air recirculation mode

Air is filtered and returned to the room, requiring an odour filter.

Saving energy

Tips for reducing energy consumption: ensure ventilation, adjust fan speed, and manage lighting.

Familiarising yourself with your appliance

Control panel

Use the control panel to configure appliance functions and check operating status.

Accessories

Purchasing accessories

Purchase accessories from after-sales service, specialist retailers, or online.

Basic operation

Switching on the appliance

Set the slide control to the desired fan setting to switch on the appliance.

Switching off the appliance

Set the slide control to the zero setting to switch off the appliance.

Switching on the intensive setting

Set slide control to 'P' for intensive mode to handle strong odours or vapours.

Switching on the lighting

Press the lighting symbol to switch the appliance's lighting on or off.

Cleaning and servicing

Cleaning products

Obtain suitable cleaning products from after-sales service; follow warnings regarding usage.

Cleaning the appliance

Clean the appliance according to specifications to prevent damage from incorrect cleaning methods.

Cleaning controls

Clean controls using a damp sponge cloth and hot soapy water, then dry.

Removing the grease filter

Grip below the grease filter, open locks, and carefully remove it.

Cleaning grease filters manually

Clean grease filters manually by soaking, brushing, rinsing, and draining.

Installing the grease filters

Insert grease filters carefully and ensure the locks engage securely.

Troubleshooting

Malfunctions

Information on rectifying minor faults yourself before contacting after-sales service.

Disposal

Disposing of old appliance

Dispose of the appliance environmentally after unplugging and cutting the power cord.

Customer Service

Contacting Customer Service

Contact Customer Service for queries, faults, or repairs, providing product and production numbers.

Installation instructions

Included with the appliance

After unpacking, check all parts for damage and completeness.

Safety clearances

Comply with the specified safety clearances for the appliance during installation.

Dimensions

Provides the overall dimensions of the appliance for installation planning.

Secure installation

Follow safety instructions for secure installation, including warnings about poisoning risks.

Instructions for the electrical connection

Connect to a properly installed grounded socket and ensure mains plug accessibility.

Instructions for the exhaust air pipe

Use suitable exhaust pipes, ensuring a 1° gradient to prevent condensate return.

Installation

Steps for checking the surround, installing the appliance, and connecting piping.

Related product manuals