Conti Xeos EVOLUTION 2 - User Manual

Evolution 2
ENTRETIEN
MAINTENANCE
- 01/2000 Entretien - Maintenance - XEOS EV - Chapitre 7 - Page 0
SACOME, Document CONFIDENTIEL, Ne peut être reproduit ni communiqué sans notre accord préalable.
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.

Summary

Cleaning the Coffee Unit

Spray Head Cleaning

Cleaning the coffee unit's spray head and diffuser with a soft brush and cleaning liquid.

Dismantle Nozzle and Filter

Cleaning the coffee unit nozzle and filter, including checking seals.

Dismantle Solenoid Valve

Cleaning the water inlet and decompression solenoid valve, including its base and seat.

Heat Exchanger Cleaning

Cleaning and descaling the heat exchanger and replacing its seals.

Cleaning the Filter Holder Unit

Replacing Filter Holder Seal

Procedure for replacing the filter holder seal using a specific screw and washer.

Boiler Maintenance

Boiler Draining and Cleaning

Procedure for draining the boiler via the purge valve and addressing impurities.

Recommended Preventive Maintenance Schedule

Check Sensors

Verifying coffee unit sensors and removing scale if necessary.

Check Valve Seal and Pressure Relief Valve

Inspecting and potentially changing valve seals and pressure relief valves.

Check Water Inlet Filter

Cleaning the water inlet filter if it becomes necessary.

Check Group Filter and Spray Nozzle

Cleaning or replacing the group filter and spray nozzle.

Check Solenoid Valve Seats

Cleaning or changing solenoid valve seats and checking connections.

Conti Xeos EVOLUTION 2 Specifications

General

Brand	Conti
Model	Xeos EVOLUTION 2
Category	Transceiver
Language	English