To Next Page
A
andrew94Aug 5, 2025
Why is there too much bubble pouring out of my CONTINENTAL EDISON BCT-0588D beer dispenser?
- RrodneycabreraAug 6, 2025
If you are getting too much foam when pouring beer from your CONTINENTAL EDISON Kitchen Appliances beer dispenser, it could be due to several reasons. You might be using the wrong pouring technique; try turning the tap fully on quickly and maintaining a distance of about 3/4" to 1" between the cup and the tap to get a thick, creamy head. The beer might be too warm, ideally, it should be between 3-6?. If the keg was shaken recently, let it settle before use. Finally, the keg might be nearly empty, in which case you should change to a new keg.
General