USING THE MACHINE
8. Press Locking knob (B) down to lift the arm.
9. Lock Bowl Lid(F) into the arm, then insert the whisk (G) or
Beater (H) or Hook (I) into outlet(E) (as pic A) till “click”
sound (as pic B) to ensure the accessory is inserted well.
10. Insert mixing bowl (D) into the housing and turn the bowl
until it locks into place.
11. Fill your ingredients into mixing bowl (D).
Must follow the max. weight / time for each accessory.
Cannot over fill ingredients and over time use, or the
machine will be destroyed or its performance is not good.
12. Press Locking knob (B) down again and in the same time
press down the arm for lock.
13. Plug in then turn Speeds Selector(C) to start the machine
and set the right speed.
Follow speeds of each accessory as manual suggested.
14. After usage, turn the Speeds Selector(C) back to the “0” to
stop machine. Then remove the plug. Press Locking knob (B)
again for taking off the accessory.
To Next Page
Loading...