Contour Genie - User Manual

To Next Page

Inﬂatable

Air Bladder

Hose

Electric

Air Motor

Hand Held

Remote

Slide mattress 2 feet toward the foot of the

bed

Place air bladder at head of bed and slide

mattress over it

RED DOT disappears when

in locked & sealed position

1. Place Bladder on the Bed

Slide mattress about 2 feet toward

foot of the bed.

Place air bladder at head of bed

and slide mattress on top of it.

Press | for power on

Press 0 for power o

When the Mattress Genie is turned

on, you can use the hand held

remote to easily adjust the angle

of elevation.

UP - Hold button down to inﬂate the

air bladder.

DOWN - Hold button down to

deﬂate the air bladder.

FLAT - Press button once to

completely to deﬂate your air bladder.

Do not press any other button or it will

cancel the deﬂation.

The ﬂat button starts a 2 minute timer to

open the valve in the motor to allow air

to escape and deﬂate the unit.

Note: You will not hear any motor noise

when deﬂating.

3. Power Mattress Genie On

Plug the black power cord into a

dedicated wall outlet.

Turn the black power button on

the motor to the “on” position.

2. Attach and Connect Hose

Attach hose to the electric air

motor.

Turn hose connector 90 degrees

clockwise until the red dot is no

longer visible.

Scan QR or visit www.contourliving.com/

mattress-genie-adjustable-wedge/

for tips to set up and to achieve the most out

of elevated sleep & relaxation.

HOW TO SET UP YOUR MATTRESS GENIE

USING YOUR MATTRESS GENIE HAND

HELD REMOTE

Reach out to our Customer Care Team if you have

any questions or concerns.

Phone:

800-950-0230 or 704-944-2800

Email:

customerserv@contourliving.com

Oce & Live Chat Hours:

Mon. - Fri., 8:30 am - 5:00 pm ET

Visit contourliving.com

& click “chat now”

C0132_2022-03-29

NEED HELP? CONTACT US!

Need help?

Do you have a question about the Contour Genie and is the answer not in the manual?

Summary

How to Set Up Your Mattress Genie

Place Bladder on the Bed

Instructions for positioning the inflatable air bladder at the head of the bed.

Attach and Connect Hose

Steps to attach the hose to the electric air motor and secure the connection.

Power Mattress Genie On

Guide to plugging in and turning on the Mattress Genie unit.

Using the Mattress Genie Handheld Remote

Remote Operation Controls

Details on using the UP, DOWN, and FLAT buttons for air bladder inflation and deflation.

Mattress Genie Troubleshooting Guide

Power and Inflation Issues

Resolving problems with the unit not turning on or inflating.

Leak Detection and Repair

Troubleshooting leaks in the air bladder, hose, or motor connections.

Deflation and Power Cycling

Addressing issues with deflation, random power cycles, and hose detachment.

Hose Connection and Condition

Solutions for hose tangles, kinks, and ensuring proper connection.