To Next PageTo Next Page
Need help?Do you have a question about the Contours ROCKWELL and is the answer not in the manual?
Important safety warnings to prevent injury or death during assembly and use.
Specifies the required mattress dimensions for safe use in the crib.
Connect stabilizer bars to crib sides using dowel pins and large screws.
Connect left and right legs to the end pieces, ensuring correct orientation of ledges.
Join the side/stabilizer assembly to the leg/end assembly using screws and washers.
Attach the mattress support to the crib sides at the desired height position.
Secure the final side panel to the assembled structure using large screws.
Remove one side panel and adjust the mattress support to its lowest position.
Attach the nut cap and medium screw to the stabilizer bar to secure it.
Important safety warnings to prevent injury or death during assembly and use.
Specifies the required mattress dimensions for safe use in the crib.
Connect stabilizer bars to crib sides using dowel pins and large screws.
Connect left and right legs to the end pieces, ensuring correct orientation of ledges.
Join the side/stabilizer assembly to the leg/end assembly using screws and washers.
Attach the mattress support to the crib sides at the desired height position.
Secure the final side panel to the assembled structure using large screws.
Remove one side panel and adjust the mattress support to its lowest position.
Attach the nut cap and medium screw to the stabilizer bar to secure it.
General| Brand | Contours |
|---|---|
| Model | ROCKWELL |
| Category | Baby & Toddler Furniture |
| Language | English |
