Contracor DBS-100 User Manual

9
CONTRACOR
®
DBS Art. 10100/10200
ENGLISH
content in compressed air system. Installation of additional moisture and oil separator can
solve this problem.
Wet abrasive removal.
To remove wet abrasive from machine tank you should disconnect the blasting
hose and remove rubber gaskets at machine hose coupling. Then you must fully open the
metering valve and close the lower ball valve in the machine compressed air line. With such
valve conguration compressed air will only enter the machine tank and press wet abrasive
out of the tank.

Contracor DBS-100 Specifications

General

Brand	Contracor
Model	DBS-100
Category	Shot Blasting Machines
Language	English