Dimensions
Power requirements: Plugs into standard 110 VAC outlet
(plug-in wall transformer with six foot long cord included)
Sensor: Semi-conductor sensor with 1.75" x .25" nickel plated
copper cap and three foot cord
Operating range of sensor: -49° to 199°F (-45° to 93°C)
Accuracy: +2°F (+2°C)
Remote switch: SPDT, 10 amps 24 volts resistive
Ambient temperature range: 32° to 140°F
(0° to 60°C)
Humidity: 90% non-condensing
Weight: 3.0 pounds (1.4kg)
2.5"
(64mm)
6.0"
(159mm)
6.25"
General Description
The FA-DX (fahrenheit) and FA-DX-AAB (celsius) FreezeAlarm™
monitors temperature, power status, security or an external contact,
and offers remote switch control capability. Upon an alarm condition,
the FreezeAlarm™ automatically dials up to three phone numbers with
a voice message. Current temperature and alarm conditions can be
checked by calling the FreezeAlarm™ from any remote location.
Applications
Applications include remote temperature, power and security
monitoring of refrigeration, heating and air conditioning equipment
for buildings (homes, cabins and commercial buildings) and monitor-
ing of any relay output system or sensor. The remote switch control
feature can be used to control thermostats or equipment from any
Touch Tone™ phone (additional parts and labor may be needed).
Features
• Adjustable high & low temperature alarm setpoints
• Three telephone number call out, up to 16 digits each
• Paging feature - any or all of the call-to numbers can be
to a digital pager
• Power loss call out alarm
• Low battery call out alarm
• Remote access to programming menu and current
condition status
• Monitors an open contact
Specifications
1724 Lake Drive West • Chanhassen, MN 55317 • 952-448-2217 FAX 952-448-1606 • Made in USA
• Remote control switch relay
• Location identification number
• Custom voice message recording
• Selectable 15 minute or 2 hour call out interval
• Selectable 10 or 3 ring call out
• Security coded access to programming menu
• Dials out in pulse or tone
• LED status indicators
• Battery back-up (9 volt-not included)
Innovative Technologies in Custom Electronic Design & Manufacturing
ALARMPOWER T1 T2
(152mm)
OUT TO
WALLJACK
SENSOR
+9V BATTERY
Telephone
Line Input
Sensor
Input
Battery
Compartment
T1 COM T2
+12VDC
PWR
AUX
ALARM
INPUTS
Power
Input
Remote Switch
T1/T2
Terminal
Block
Option
Selector
FA-DX / FA-DX-AAB
FreezeAlarm
™
Need help?
General
To Next Page
