EasyManuals Logo

ControlOMatic MegaChlor Operating Instructions

ControlOMatic MegaChlor
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Power Level ON Time
1 00:30:00
2 01:00:00
3 02:00:00
4 03:00:00
5 04:00:00
Power Level On Time
6 05:00:00
7 06:00:00
8 07:00:00
9 08:00:00
10 09:00:00
added. If currently in a production cycle
pressing the Boost button will terminate
the production cycle and place the
MegaChlor in standby mode for 3 hours.
The boost button is an easy way to start
or stop a chlorine production cycle.
Replacement Parts
The titanium plates of any saltwater chlorine generator will eventually wear out and need replacing. Visit
www.controlomatic.com and select Shop which will take you to our store.
Item Part Number Type Description
1 MEGACHLOR-PSIL Power Supply
Replacement in-line power supply for MegaChlor, 12VDC
2 MC-ELECTRODE Electrode MegaChlor electrode replacement
3 MCCD-ELECTRODE Electrode MegaChlor electrode replacement with chlorine detection
4 Insta-Test-4 Test Kit
Insta-Test 4 Spa Test Strips, Chlorine, pH, Hardness &
Alkalinity
5 Insta-Test-Salt Test Kit
Insta-Test Salt Pool and Spa Test Strips Sodium Chloride
6 MC-CELL Cell Body Replacement cell body, electrode is a separate item.
NOTE: Installing the MegaChlor inline may void the spas warranty and UL safety certification as you will be
adding to the existing equipment of the spa. We can provide the conversion kit MCIL-KIT or you can find the
required parts at your local hardware store. If you install it inline we recommend spas with a 24 hour
continuously running pump that has 3/4” tubing. For an inline install, there is no flow detection built into the
MegaChlor and if there is no flow and the MegaChlor is left on gasses will accumulate in the pipes that have a
risk of explosion.
Boost Mode & Power Level Times
Activating Boost Mode will start a chlorine production cycle. To activate Boost Mode simply press the Boost
Mode Button, the GREEN and BLUE led’s will flash letting you know a production cycle will start.
IMPORTANT: The MegaChlor can’t make chlorine faster. The Boost Mode simply turns it on for a
single cycle. If the pool chlorine has dropped to 0 PPM from heavy usage, chlorine may need to be

Other manuals for ControlOMatic MegaChlor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ControlOMatic MegaChlor and is the answer not in the manual?

ControlOMatic MegaChlor Specifications

General IconGeneral
BrandControlOMatic
ModelMegaChlor
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals