Do you have a question about the Contura 560T and is the answer not in the manual?
Details quality approvals, manufacturer assurance, and flue requirements for safe installation.
Formal statement of compliance with European standards, including technical specifications.
Highlights essential warnings and notes for installation and operation.
Overview of assembly, installation, and general product information.
Lists output, efficiency, dimensions, and certifications for Contura 500 series models.
Covers building permission, structural support, floor plates, and chimney.
Minimum clearances to combustible materials for 510/550/550A models.
Minimum clearances to combustible materials for the 520T model.
Minimum clearances to combustible walls and ceiling for 560T/560K models.
Minimum clearances to combustible walls and ceiling for the 570 model.
Minimum clearances to combustible walls and ceiling for 580/585 models.
Details how to supply combustion air through ducts or vents.
Guidance on air duct connection diameter, insulation, and sealing.
Instructions for safely removing the stove body and its components from the pallet.
Safety warning regarding stove tipping before base-plate fitting.
Procedure for connecting the chimney flue to the top of the stove.
Procedure for connecting the chimney flue to the rear of the stove.
Steps for assembling the base-plate, rear panel, and side panels.
Steps for assembling the surround and fitting the soapstone for the 520T.
Steps for assembling the surround and fitting parts for the 560T.
Steps for assembling the surround and fitting parts for the 560K.
Steps for assembling the surround and fitting glass components for the 570.
Steps for assembling the pedestal surround and panels for 580/585.
Instructions for attaching the clip-on plinth to the stove.
Steps for installing the plinth drawer slide and the drawer itself.
| Type | Wood Stove |
|---|---|
| Fuel Type | Wood |
| Log length | 13.7 inches |
| EPA Certified | Yes |
| Burn Time | Up to 8 hours |
| Flue Size | 6 inches |