The CONVECTAIR 5100/5101 FLB/FLB+ Panel Convector is an electric heater designed for domestic household use, offering efficient and comfortable heating. This manual provides comprehensive instructions for installation, operation, and maintenance to ensure optimal performance and user safety.
Function Description:
The CONVECTAIR panel convector is an electric heater that provides warmth through convection. The FLB models are designed to be controlled by a separately purchased wall thermostat, as they do not have integrated controls. The FLB+ models, however, are equipped with a high-precision electronic thermostat, offering advanced control features directly on the unit. These FLB+ models should not be connected to a wall thermostat. The heater is designed to maintain a desired room temperature, with features like Eco and Comfort modes for energy efficiency and personalized comfort. Adaptive Start functionality allows the heater to learn and optimize its heating schedule to reach the set temperature at the programmed time.
Important Technical Specifications:
The CONVECTAIR 5100/5101 series offers various models with different power outputs and dimensions, all operating on a 240V, 60 cycle circuit.
- Total Power: Ranges from 500 W to 2000 W.
- 500 W models (5101-C05-BB FLB+, 5100-C05-BB FLB)
- 1000 W models (5101-C10-BB FLB+, 5100-C10-BB FLB)
- 1500 W models (5101-C15-BB FLB+, 5100-C15-BB FLB)
- 2000 W models (5101-C20-BB FLB+, 5100-C20-BB FLB)
- Voltage: 240 V.
- Dimensions (approximate):
- Height: 400 mm (15 ¾ inches) for all models.
- Depth: 115 mm (4 ½ inches) for all models.
- Width: Varies by power output:
- 425 mm (16 5/8 inches) for 500 W models.
- 525 mm (20 ¾ inches) for 1000 W models.
- 625 mm (24 5/8 inches) for 1500 W models.
- 825 mm (32 ½ inches) for 2000 W models.
- Weight: Ranges from 2.7 kg (6 lb) to 4.2 kg (9.3 lb), depending on the model.
- Certification: ETL Listed, Cert. to CSA Std. No. E60335-2-30.
- Ingress Protection (IP) Rating: IP20.
- Color: RAL 9016 White/Blanc.
Usage Features (FLB+ models):
- Heater On/Off: A toggle switch allows users to turn the heater on or off.
- Temperature Setting: Adjustment keys (+ and -) enable users to increase or decrease the desired temperature.
- Heat Modes: The unit offers two heat modes:
- Comfort Mode (red indicator): For setting the desired temperature for active use.
- Eco Mode (green indicator): Recommended for short absences, providing energy savings.
- Users can toggle between these modes using a dedicated button. An override function allows temporary changes to the mode, which automatically terminates at the next programmed event or at 03:00.
- Display: Features a numerical display for time and temperature, with a central dot flashing when the heater is actively heating.
- Time and Day Configuration: Upon first use or after a power outage, the time (12H/24H format) and day of the week (d1: Monday to d7: Sunday) can be set using the adjustment keys and confirmation button.
- Temperature Unit Display: The temperature unit can be switched between Celsius (°C) and Fahrenheit (°F) by pressing the '-' and 'C/F' buttons simultaneously.
- Daily Programming: The heater offers nine 24-hour programs, allowing users to select a specific program for each day of the week to automate heating schedules.
- Adaptive Start: This intelligent feature allows the heater to learn the optimal time to begin heating to reach the programmed temperature at the desired time, accounting for room size and insulation.
- Key Lock: A key lock function (Locd/OPEn) can be activated by simultaneously pressing the '-' and 'C/F' buttons to prevent inadvertent modifications to the settings.
- Overheat Protection: An automatic thermal cut-out turns the heater off if it overheats. The heater reactivates once it cools down and will continue to cycle until the cause of overheating is resolved.
Maintenance Features:
- Regular Cleaning: To maintain optimal performance and efficiency, regular cleaning is recommended. Dust can be removed with a soft cloth, and stains with a dampened cloth.
- Grille Cleaning: It is particularly important to regularly remove dust and debris that may accumulate on the grilles of the FLB/FLB+ panel convector. This is especially crucial for units installed in areas exposed to cigarette smoke or in kitchens, as accumulated particles can cause discoloration of the grilles.
- Prohibited Cleaning Agents: Abrasive or acetone-based products should never be used, as they can damage the epoxy coating of the appliance.
- Professional Servicing: All servicing, maintenance, or repairs on CONVECTAIR appliances must be performed by qualified and authorized personnel with the power turned off to prevent electric shock or injury.
- Safety Precautions: Before any maintenance or cleaning, the unit must be disconnected from power and allowed to cool completely.
Safety Warnings:
- The heater is hot when in use; avoid touching hot surfaces.
- Keep combustible materials at least 3 ft (0.9 m) from the front and sides of the heater.
- Do not cover the heater to prevent overheating.
- Do not block air intakes or exhaust.
- Do not use in areas with flammable vapors or liquids.
- Do not install directly below a socket-outlet.
- FLB series heaters (without integrated thermostats) should not be used in small rooms occupied by persons unable to leave on their own, unless constantly supervised.
- Children aged 8 and above, and persons with reduced capabilities, can use the appliance with supervision and instruction. Children under 3 should be continuously supervised.
- The appliance must be installed in compliance with national and local standards, preferably by a master electrician.
- Ensure the appliance is installed so that switches and controls cannot be touched by a person in a bathtub or shower.
- Do not install behind doors, cabinets, or in front of air extractors.
- The device must be grounded, and a circuit breaker is necessary for installation, loaded to no more than 80% of its capacity.
- If power supply wires are damaged, they must be replaced by the manufacturer, its after-sales service, or similarly qualified personnel.
The CONVECTAIR panel convector is backed by a 2-year warranty against defects in material or workmanship for the heater and components, and a 10-year warranty for the heating element. Users are encouraged to register their product and provide feedback to help improve future products and experiences.
To Next Page
Need help?
General
