8 Steljes Audio . ConXeasy SB603 User Guide
3. Buzzing or humming noise
- Make sure audio cables are securely connected at the terminals of the SB603 and the
external devices.
- Test on an alternate device or replace the audio cable.
- Test the device and cable on an alternate input on the SB603 .
4. The remote control is not functioning
- Aim the remote control directly at the sensor on the front of the SB603 .
- Reduce the distance between the remote control and the SB603 .
- Make sure that the battery is inserted with its polarities (+/– signs) aligned as indicated.
- Replace the battery.
5. The sound bar and remote are not responsive
- Unplug the power cord from the AC output, and plug back in after a few seconds.
ConXeasy SB603 Manual LT.indd 8 22/01/2016 14:53
To Next Page
Loading...
