Need help?Do you have a question about the ConXeasy SWA401 and is the answer not in the manual?
Amplifier Specifications| continuous average output power | 40W (20W x 2) |
|---|---|
| rated distortion | 0.40% |
| rated impedance | 4 ohms |
| frequency response | 20-20kHz ±2 dB |
Source Input| front input impedance | 20K Ohms |
|---|---|
| front input sensitivity for rated power | 300mV RMS |
| back input impedance | 20K Ohms |
| back input sensitivity for rated power | 300mV RMS |
Speaker Specifications| speaker power | 10-40W |
|---|---|
| speaker impedance | 4 ohms |
| speaker unit size | 240mm H x 160mm W x 150mm D |
Power Requirements| power supply | 19V DC |
|---|---|
| power consumption at maximum available output | 40W |
| power consumption with music (typical) | 10W |
| power consumption no signal | 2.1W |
| power consumption standby | 0.5W |
Remote Control| ir frequency | 38.7 kHz |
|---|---|
| batteries | AAA x 2 |
| remote unit size | 140mm L x 42mm W x 18mm D |
Read all instructions carefully and check the voltage selector for your country.
Avoid water/moisture, unstable surfaces, and servicing. Clean with a dry cloth.
Opening covers may expose you to dangerous voltages; do not open unless qualified.
Covers production and material defects for one year from purchase date.
Excludes damage from transport, misuse, accidents, unauthorized repair, or force majeure.
Contact dealer with proof of purchase; service repair value limited to product value.
To Next Page
