SWA401 SPECIFICATIONS
AMPLIFIER
Power Amplifier Output
Continuous Average Output Power : 40W (20W x 2)
Both channels : 1KHz / 1%THD
Rated Distortion (1/2 power) : 0.40%
Rated Impedance : 4phm
Frequency Response (20-20kHz) : ±2 dB
Source Input
Front A & B : 3.5mm Stereo Jack
Input Impedance : 20K Ohms
Input Sensitivity for Rated Power : 300mV RMS
Front USB port : USB A type jack
USB decode : MP3/WMA/WAV
Back
Variable Input : Screw Terminal
Input Impedance : 20K Ohms
Input Sensitivity for Rated Power : 300mV RMS
Fixed Input : Screw Terminal
Input Impedance : 20K Ohms
Input Sensitivity for Rated Power : 300mV RMS
4 INCH SPEAKER
Electrical
Power : 10-40W
Impedance : 4 ohm
Physical Specifications
Unit Size : 240mm H x 160mm W x 150mm D
9.4” H x 6.3” W x 5.9” D
Power Requirements
Power Supply : 19V DC
Power Consumption at maximum available output : 40W
Power Consumption with music (typical) : 10W
Power Consumption no signal : 2.1W
Power Consumption standby : 0.5W
Mode
Hall / Music /Speech Mode
Physical Specifications
Unit Size : 50mm x 50mm x 29mm
1.97” x 1.97”x 1.14”300mV RMS
SWA401-AMP Approvals
CE-EMC
REMOTE CONTROL
Electrical
IR Frequency : 38.7 kHz
Batteries : AAA x 2
Physical Specifications
Unit Size : 140mm L x 42mm W x 18mm D
5.5” L x 1.65” W x 0.7” D
Steljes Audio reserves the right to change specifications without notice. Images and
photos are for illustration only and actual product may vary. E&OE.
Exclusive provider of
ConXeasy™ Audio Products
To Previous Page
