14
In more detail...
BDW60CL 60cm Built in dishwasher
GB
IE
Different settings for water softener
There are 2 different softener settings related to the used kind of detergent:
Detergent powder setting
• The salt is added from the water softener only.
With the multitab indicator OFF the multitab option is off.
Factory default setting: , multitab off.
Multitab setting
• The salt is added from the water softener in addition to the multitab salt.
With the multitab indicator ON, you have selected the multitab option.
Factory default setting:
While your setting for detergent powder is mandatory, factory default setting for
multitab will normally perform well.
For adjustments see How to adjust a default setting section.
How to ll the salt container
Caution!
Only use dishwasher salt. Other products can cause damage to the
appliance!
Water and salt can come out from the salt container when you ll it.
Risk of corrosion. To prevent it, run a programme immediately after lling.
1. Turn the cap anticlockwise and
open the salt container.
2. Only for the rst time:
Put 1 litre of water into the salt
container.
3. Fill the salt container with
dishwasher salt.
4. Remove the salt around the
opening of the salt container.
5. Turn the cap clockwise to close
and seal the salt container.
Operation
BDW60CL-C&L-A5-GB-IM-18.indd 14 4/7/14 10:51 AM
To Next Page
Loading...
Need help?
General
