34
02
Figure above shows the air circulation requirements including a slot that should be cut
into the plinth if tted.
It is essential when installing your oven there is adequate air circulation around the
appliance to ensure the correct operation of the appliance. Inadequate air circulation will
greatly impair the performance of the appliance and can affect adjacent cabinets due
to the rise in temperature. The panels of the kitchen unit that are next to the oven must
be made of a heat resistant material. Ensure that the glues of units that are made of
veneered wood can withstand temperatures of at least 120 ºC. Remove the back of the
kitchen unit to ensure an adequate current of air circulates around the oven.
min. 2 mm
min. 45 mm at rear
min. 200 mm
min. 10 mm
10 mm
Upper vent
Ensuring sufcient ventilation
To Next Page
Loading...
