CookRite ATO-4B - Page 24

- 21 -
Note
1、Pressure maintaining valve connects with air intake, must be installed by
authorized and licensed technicians, to ensure interface tightness.
2、The pressure regulator(s) have connected, the maximum load of natural gas
cannot exceed 6”, and of LP cannot exceed 12”.
3、Adjustment range of the pressure regulator(s) is 3”-6”for natural gas, and
5”-12”for L.P..
11. Schematic diagram for installation of back panel
Step I
(Insert the inserted bar of
rear panel into the
corresponding position of
rear panel)
Step II
(Fix the inserted bar of rear panel
with the rear panel by
self-tapping screw)