EasyManua.ls Logo

CookTek MPL362CR-200 - User Manual

CookTek MPL362CR-200
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION ● OPERATION
OWNER’S MANUAL
Commercial Induction Plancha
Models MPL362CR-200, MPL362CR-400, MPL362CS-200,
MPL362CS-400, MPLD362CR-200, MPLD362CR-400,
MPLD362CS-200, MPLD362CS-400
Part Numbers 648000, 648100, 648200, 648300, 648400,
648500, 648600, 648700
CookTek Induction Systems, LLC
Toll Free: +1 (888) COOKTEK
Toll Free Fax: +1 (888) COOKFAX
Phone: +1 (312) 563-9600
Fax: +1 (312) 432-6220
www.cooktek.com
customerservice@cooktek.com
CookTek Induction Systems, LLC
Toll Free: +1 (888) COOKTEK
Toll Free Fax: +1 (888) COOKFAX
Phone: +1 (312) 563-9600
Fax: +1 (312) 432-6220
www.cooktek.com
customerservice@cooktek.com
Manual Plancha14107_A USINTL

Questions and Answers

  • M
    Misty StewartAug 1, 2025
    Why does my CookTek Kitchen Appliances plancha suddenly stop heating?
    • J
      Jennifer GrossAug 1, 2025
      If your CookTek Kitchen Appliances plancha unit suddenly stops heating, it might be due to a power brownout. Ensure proper voltage and power levels. Another cause could be that the circuit is shared with another electrical device; make sure the unit is not sharing a circuit. Also, the safety shut-off may have engaged if the unit reached an unsafe temperature, especially in power cook mode. The display will show "OH," and heating will resume once the surface cools down.
  • G
    gardnererikaAug 10, 2025
    How to troubleshoot CookTek Kitchen Appliances unit with no power?
    • J
      Jennifer WilliamsAug 10, 2025
      If your CookTek Kitchen Appliances unit has no power, start by plugging it into an appropriate receptacle. If it's already plugged in, ensure the receptacle is energized. Check wall switches and the circuit breaker. You can also plug a different electronic device into the receptacle to confirm that power is present.
  • C
    Christy PaceAug 21, 2025
    What to do if my CookTek Kitchen Appliances cooking surface does not get hot enough?
    • D
      David OrrAug 21, 2025
      If the cooking surface of your CookTek Kitchen Appliances plancha doesn't get hot enough even at the maximum power setting, do not use extension cords, as they may affect the power levels. Also, ensure the plancha unit is not sharing a circuit with other electrical devices. A cold air draft around the unit may also be a factor.

Summary

ELECTRICAL CONNECTION

Specifications

Provides dimensional data and diagrams for the unit.

BEFORE OPERATION

Grounding Instructions

Details essential grounding procedures to prevent electric shock and ensure safe operation.

Commercial Approval

Confirms product compliance with UL, CSA, and European Economic Area standards.

GENERAL INFORMATION

User Interface

Describes the knob, display, and buttons for controlling power and temperature.

Knob Controls

Details the function of the control knob for setting power and temperature levels.

Display Indicators

Explains the 4-digit display for settings, status, and error codes.

Unit Operation

Covers independent zone control, power mode, and temperature mode operation.

IMPORTANT INFORMATION

Usage Guidelines

Provides essential tips for safe and effective use, including placement and avoiding water.

CARE AND CLEANING

Cleaning Procedures

Instructions for safely cleaning the unit, including the cooking surface and grease drawers.

IMPORTANT SAFETY PRECAUTIONS

General Safety

Key safety warnings regarding hot surfaces, water immersion, child supervision, and damaged cords.

WARRANTY STATEMENT

Warranty Scope and Limitations

Details warranty coverage, exclusions, and conditions for commercial equipment.

International Warranty

Information on warranty validity and service outside the USA and Canada.

TROUBLESHOOTING

Error Codes

Lists error codes, their causes, and recommended troubleshooting steps for malfunctions.

CookTek MPL362CR-200 Specifications

General IconGeneral
ModelMPL362CR-200
TypeInduction Cooktop
Frequency50/60 Hz
Dimensions14.4" W x 16.5" D x 4.7" H (366 mm x 419 mm x 119 mm)
MaterialStainless Steel
Power3600 Watts
Control TypeDigital Touch Controls
Voltage200-240 VAC