Do you have a question about the Cookworks chocolate fountain and is the answer not in the manual?
Connect the appliance's mains lead wires to the correct terminals: blue to N, brown to L, and green/yellow to E.
Identify the motor base, tiers, spiral bit, tower, switch, reservoir, indicator light, and power supply cord.
Wash parts, ensure unit is off, then assemble spiral bit, tower, middle tier, and bottom tier onto the reservoir.
Switch off and unplug before cleaning. Wash removable parts, clean base with damp cloth. Dispose of hardened chocolate properly.
Use chocolate with >40% cocoa butter. Melt using microwave or hot water method, adding oil if needed for smooth flow.
Place on stable surface, turn knob to pre-heat, then turn again to start motor for chocolate cascade.
Clear tower base regularly, ensure chocolate is melted before motor use, avoid mixing liquids, and do not operate over 8 hours.