ISSUE-1 20/10/2017 4
Assembly & use
Fig 1 Fig 2 Fig 3 Fig 4
1. Remove the lid from the storage position at the end of the
blending jar.
2. Clean all parts of the personal blender thoroughly before use.
3. Place the motor housing on a stable surface, fully unwind the
cable and plug in.
4. Ensure all ingredients are at or below room temperature. Never
use hot ingredients.
5. Prepare the food (e.g. remove the peel, pips and stones from
fruit, cores from pineapple etc.) and cut the fruit into 1-2cm
pieces.
6. Place prepared fruit and/or vegetables into the blending jar
(fig. 1).
IMPORTANT:
Your blender is equipped with
a safety feature, where the
blades will not operate unless
the base of the jar and motor
housing are fully locked.
To Next Page
Loading...
Need help?
General
