STEP 2
Attach the solar panel (g) to the top of the umbrella. Inset the power cable to the
underneath of the panel. Attach the panel by rotating clockwise until it is tight.
Note: The solar panel requires 6 hours of sunlight to charge batteries.
STEP 3
Fill base (i) with water or sand. Once full and stable, use the Allen key (d) use screws
(b) and washers (c) to x the umbrella frame to the llable base (i). You will need
one person to stabilise the umbrella and hold it into position whilst the second
person attaches the frame to the base with screws and washers.
①
a.
d.
d.
b.
c.
i.
①
②
To Next Page
Loading...
